Accessories
Presslug Die
SPARE PELLET DIES FOR THE PRESSLUG
SPECIFICATIONS
.177 (.1780) CALIBER DIE: MINIMUM 12.42 GRAINS TO MAXIMUM 24.54 GRAINS.22 (.217) CALIBER DIE: MINIMUM 24.86 GRAINS TO MAXIMUM 42.01 GRAINS.25 (.250) CALIBER DIE: MINIMUM 31.45 GRAINS TO MAXIMUM 55.66 GRAINS.30 (.300) CALIBER DIE: MINIMUM 51.79 GRAINS TO MAXIMUM 82.36 GRAINS.357 (.358) CALIBER DIE:…$399.95Presslug Cut
Presslug Cut is an effective tool for cutting lead wire and making small lead cylinders which can then be turned to slugs in the Presslug pellet press. It will save you time and you don’t have to cast molten lead.
$349.95TalonBolt Quiver
Quick Release Quiver that holds 4 AirForce Talon Bolts
SKU #: U2403
$72.95Talon Bolt Scope w/Rings 4X32
Talon Bolt Scope w/Rings 4X32
Illuminated reticle BDC
crossbow scope- Includes dual-color illuminated reticle
(TG8504B3L)
…
$79.95- Includes dual-color illuminated reticle
Hand Pump
An alternative to filling from a scuba tank.
3-Stage Handpump
Does not heat up after constant use
Requires less effort than other pumps
Can achieve 3600psi
Integral air pressure gauge
Includes 11′ braided steel hoseSKU #: U1014
$224.95Presslug Wire
10 lb Minimum Order.
Wire Measurements
.166 / 4.5mm / .177 / 1lb = 9.70ft
.200 / 5.5mm / .22 / 1lb = 6.75ft
.222 / 6.35mm / .25 / 1lb = 5.45ft
.280 / 7.62mm / .30 / 1lb = 3.33ft
.327 / 9mm / .357 / 1lb = 2.5ft
$59.95Dovetail to Picatinny Adaptor
Easily mount your favorite picatinny accessories with this 11mm dovetail to picatinny adaptor
SKU#: U1076
$15.95AirForce Airguns / RAW T-Shirt
$19.95 – $24.95AirForce Airguns Airgun Believers T-Shirt
AirForce Airguns Airgun Beliver T-Shirt. Become an official Airgun Believer Today!
50% Preshrunk Cotton
50% Polyester$15.95TalonBolt Air Rifle Bolts (6 Pack)
The bolts for the new rifle have a shorter than normal 18 inch length, a heavy carbon fiber weave, and dual shatter resistant impact collars that combine to create a magnum bolt that is much stronger than other airgun bolts on the market. The bolts have a high visibility glow in the dark vanes and…
$52.95Texan .457 / .50 Carbon Fiber Spare Tank
Already have a Texan .457? Want to get more power and better velocities? Here you go! Tank ships with TX2 Vavle installed and ready to go, just need to install onto your rifle and you are off to the races.
SKU#: U2090
$419.95Spin-Loc® Texan® Spare Tank
Equipped with pressure gauge and quick fill connection fits Texan® Only
SKU#: U2089
$279.95
Related posts
AirForce Air Rifles on CO2
October 3, 2023
by Tom Gaylord I have the best job in the world, because when new stuff comes out, I get to test it. Like the new CO2 adapter for AirForce air rifles – I got to test all three air rifles before anyone. I already had a long background with all three AirForce guns from both…
10 Tips for Choosing the best Air Rifle
February 7, 2024
Are you in the market for the perfect air rifle that meets your needs and preferences? Choosing the best air rifle can be a daunting task with so many options available. Whether you’re a seasoned enthusiast or a beginner, finding the right air rifle requires careful consideration. In this guide, we’ll provide you with 10…
Floating for Hogs
July 26, 2017
by Luke Clayton | View/Print Article from Airgun Hobbyist There is something very special about floating silently down a backwoods stream or along the edge of a remote lake in a small boat, canoe or kayak. Add the excitement of the possibility of rounding a bend in the stream and encountering a sounder of undisturbed…
My Condor is too powerful
October 26, 2015
View/Print Article I won an AirForce Condor SS in .22 caliber at the annual NC Airgun Show in Hickory back in October. The airgun is great with lots of power and very accurate. The only problem is that it is too powerful for my steel field targets. It was denting the paddles and bending up…